Decontaminating mat for flooring

The decontamination mats offered by JS Medical is a multi-layer antibacterial mat consisting of 30 peel-off individual disinfection insoles.

Thanks to the special water-based adhesive, our decontamination mats can be placed anywhere without leaving any traces, providing reliable antibacterial protection and ease of use on carpets and various floor surfaces.

The precise and high-quality adhesive of this type of decontamination mats adheres perfectly to the floor and does not require a frame.

The JS Medical antibacterial - decontamination mats cleans both the soles of shoes and the wheels of trolleys.

It disinfects entrances and rooms, facilitating daily cleaning, maintenance and antibacterial disinfection.

The application of the decontamination mat is wide, including hospitals, sterile rooms, operating rooms, infectious departments, laboratories.

In industry, this type of antibacterial decontamination mats are used in the pharmaceutical, food, electronics and optical industries.

The product is ideal for disinfection wherever decontamination and infection prevention are required.

Technical specification

Good resistance to high temperatures, good UV and aging resistance.

Temperature: Optimal: min. 15°C - max. 30°C

Use: min. -20°C to max. 70°C

Limit: min. -25°C to max. 90°C

Electrostatic charge: on the floor with a new mat: form -80 to -120 V/inch

INSTRUCTIONS FOR USE:

• Clean and dry the area where the mat will be placed.
• To remove the bottom protective layer, tear it off from the transparent tape that extends 4 mm from the opposite side of the numbered labels.
• Starting from the short side, stick the mat to the floor, taking care not to create wrinkles or creases.
• When the decontamination mat is stuck, press firmly by walking on it, paying particular attention to sticking the corners.
• Remove the protective film on the top layer located above the numbered label. The mat is ready to use.
• When the sheet is dirty and worn, remove it by pulling off the numbered label.
• The numbers on the labels indicate the remaining sheets.
• When all the sheets are finished, remove the last double-sided adhesive layer from the floor and place a new adhesive mat, following the same procedure.
• Do not bend the packaging and keep it horizontal.
• Store in a dry place, away from sources of light and heat.
• To optimize the antibacterial and disinfecting effect, take at least 3 steps over the mat.